grid
SCROLL

For a very long time, heat loss within buildings—the outcome of thermodynamic interactions when the heated inner and cold outer air collide—was considered as an unavoidable part of architectural construction.

Heat loss within a building is gauged using thermal transmittances. Heat transfer is also known as transfer efficiency or the R-value of a structure.

Older structures typically have far poorer heat loss ratings. This is due to the buildings’ propensity for draftiness, insufficient insulation, or mould growth brought on by an increase in the cold air that creates moisture as a result of temperature variations.

A thermal bridge is a region of a building or construction that is continuously penetrated by an element having a higher thermal conductivity. Particular locations of heat loss form thermal bridges.

Yet, the introduction of 3D modelling makes it possible to easily expose such thermal bridges, allowing any substantial causes to overall energy loss to be discovered.

Many different applications that cause heat loss can be identified using 3D thermal modelling. The following assemblies may account for more than half of a building’s heat loss!

What are the missing links in continuous insulation?  

  • Structural steel beams

In conventional structures, internal steel beams extend through the building’s floor slabs. In low temperature structures like freezer or cold storage rooms, thermal bridges form at the base of steel columns.

  • Balconies and canopies

The most common interface details for structural framing are those that link to slab edges or spandrel beams on the interior side of the thermal envelope while passing through air barrier and insulation layers.

Thermal bridging at balcony and canopy connections can diminish a wall assembly’s R value by as much as 60%.

  • Brick shelves

When there are non-continuous insulation features present, heat loss occurs at wall transitions and at the foundation perimeter, lowering the effective R value of the external wall.

Using techniques where thermal breaks can insulate these crucial places and prevent, or reduce, thermal bridging is the key to raising the R value of structures and maintaining a well-insulated building.

Armatherm offers a comprehensive selection of solutions that are specifically designed to increase energy efficiency. We are a top provider of structural thermal break materials to the building sector.

Whenever there is a building envelope penetration, our thermal break solutions can be applied. By doing this, heat loss at places like balcony, canopy, parapet, masonry shelf angles, and cladding connections is effectively reduced.

Other Articles
& Projects

Thermal break articles

Armatherm upcoming events

Thermal break articles

The importance of using thermal break materials with the right compressive strength

Thermal break articles

Armatherm, Running On The Sun

Thermal break articles

Armatherm™ partners with Hanley Wood offering thermal bridging webinar

Thermal break articles

How to make flat roof systems energy efficient

Thermal break articles

Armatherm achieves Passivhaus Column Base certificate

Thermal break articles

Thermal breaks are the missing links in continuous insulation

Thermal break articles

Ultra-high strength polyurethane can control heat loss through steel framing

Thermal break articles

Armatherm: Effectively isolating cold storage facilities

Thermal break articles

Delving into data centres: why is temperature control so important?

Get in touch

Ready to talk about structural thermal breaks?

armatherm
Request a quote